Shopping on line can be easy, simple and save you lots of money. It can also take a lot of your time, frustrate you, and result in unwanted purchases. Now the same can be said for regular high street shopping, but with the vast opportunity presented by the Internet it will pay you to spend a few minutes reading this and understanding how to better optimize your Ignition System shopping experience:

1. Compare - without doubt the biggest advantage that the Ignition System offers shoppers today is the ability to compare thousands of Ignition System at a time. This is a great thing, but not necessarily all the time! Too much can be daunting at times so take advantage of the great comparison sites and where possible let them do the hard work for you.

2. Research - if it has been said it will be on the internet. Ignorance is no longer a justifiable reason for buying the wrong thing. Take the time to research in detail everything that you could possible want to know about

3. Testimonials - don't know anybody that has bought a Ignition System? Wrong! If the Ignition System is good the internet will let you know. Use the Internet as a friend and get testimonials before you buy.

4. Questions - Got a question about Ignition System then search the Forums, FAQ's, Blogs etc. Don't be afraid to ask .....

5. Reputation - Never heard of the company selling Ignition System? Don't worry, no reason why you should know every company in the world, but you know someone that does! Use the internet to find out what people are saying about Ignition System and build up a picture of their reputation for sales, returns, customer service, delivery etc.

6. Returns - still worried that even after all of the above your Ignition System wont be what you want? Check out the returns policy. There is so much competition now that someone, somewhere is bound to offer the terms that you are comfortable with.

7. Feedback - happy with your Ignition System then let people know, after all you are depending on others people input in your buying decision, so why not give a little back.

8. Security - check for the yellow padlock on the Ignition System site before you buy, and the s after http:/ /i.e. https:// = a secure site

9. Contact - got a question about Ignition System, or want to leave a comment then check out the sites contact page. Reputable companies have them and respond.

10. Payment - ready to pay for your Ignition System, then use your credit card or PayPal! Be aware of companies that don't accept them, there may be genuine reasons but given the huge amount of choice you have when buying online there is no reason at all not to buy via credit card or PayPal.

The ignition system of an internal-combustion engine is an important part of the overall engine system that provides for the timely burning of the fuel mixture within the engine.All conventional petrol (gasoline) engines require an ignition system. The ignition system is usually switched on/off through a Lock (device) switch, operated with a Key (lock)#Car key or code patch.

History The earliest petrol engines used a very crude ignition system. This often took the form of a copper or brass rod which protruded into the cylinder, which was heated using an external source. The fuel would ignite when it came into contact with the rod. Naturally this was very inefficient as the fuel would not be ignited in a controlled manner. This type of arrangement was quickly superseded by spark ignition, attributed to Karl Benz, a system which is generally used to this day, albeit with sparks generated by more advanced circuitry. Early low-speed stationary engines often used a moving contact which protruded into the cylinder. This contact was quickly closed and reopened at the precise instant, producing a spark across the contacts, generated by a coil.

Magneto system The simplest form of spark ignition is that using a Magneto (electrical). The engine spins a magnet inside a coil, and also operates a contact breaker, interrupting the current and causing the voltage to be increased sufficiently to jump a small gap. The spark plugs are connected directly from the magneto output. Magnetos are not used in modern cars, but because they generate their own electricity they are often found on piston aircraft engines and small engines such as mopeds, lawnmowers, snowblowers, chainsaws, etc. where there is no battery; also on the small engine's ancestor, the stationary engine (variously called "hit and miss") of the early twentieth century; on older gasoline or distillate farm tractors before battery starting and lighting became common; and also in aircraft piston engines, where their simplicity and self-contained nature confers a generally greater reliability as well as lighter weight in the absence of a battery and generator or alternator. Aircraft engines usually have multiple magnetos to provide redundancy (engineering) in the event of a failure. Some older automobiles had both a magneto system and a battery actuated system (see below) running simultaneously to ensure proper ignition under all conditions with the limited performance each system provided at the time.

Switchable systems The output of a Magneto (electrical) depends on the speed of the engine, and therefore starting can be problematic. Some magnetos incorporate an impulse system, which spins the magnet quickly at the proper moment, facilitating easier starting at slow cranking speeds. Some engines, such as aircraft but also the Ford Model T, utilized a system which relied on non rechargeable dry cells, (like large flashlight batteries, not what are usually thought of as automobile batteries today) to start the engine or for running at low speed; then the operator would manually switch the ignition over to magneto operation for high speed operation. In order to provide high voltage for the spark from the low voltage batteries, however, a "tickler" was used, which was essentially a larger version of the once ubiquitous electric buzzer. With this apparatus, the direct current passes through an electromagnetic coil which pulls open a pair of contact points, interrupting the current; the magnetic field collapses, the spring-loaded points close again, the circuit is reestablished, and the cycle repeats rapidly. The rapidly collapsing magnetic field, however, induces a high voltage across the coil which can only relieve itself by arcing across the contact points; while in the case of the buzzer this is a problem as it causes the points to oxidize and/or weld together, in the case of the ignition system this becomes the source of the high voltage to operate the spark plugs. In this mode of operation, the coil would "buzz" continuously, producing a constant train of sparks. The entire apparatus was known as the Model T spark coil (in contrast to the modern ignition coil which is only the actual coil component of the system), and long after the demise of the Model T as transportation they remained a popular self-contained source of high voltage for electrical home experimenters, appearing in articles in magazines such as Popular Mechanics and projects for school science fairs as late as the early 1960s. In the UK these devices were commonly known as trembler coils and were popular in cars pre-1910, and also in commercial vehicles with large engines until around 1925 to ease starting.

The Model T (built into the flywheel) differed from modern implementations by not providing high voltage directly at the output; the maximum voltage produced was about 30 volts, and therefore also had to be run through the spark coil to provide high enough voltage for ignition, as described above, although the coil would not "buzz" continuously in this case, only going through one cycle per spark. In either case, the high voltage was switched to the appropriate spark plug by the timer mounted on the front of the engine, the equivalent of the modern distributor. The timing of the spark was adjustable by rotating this mechanism through a lever mounted on the steering.

Battery operated ignition With the universal adaptation of electrical starting for automobiles, and the concomitant availability of a large battery to provide a constant source of electricity, magneto systems were abandoned for systems which interrupted current at battery voltage, used an ignition coil (a type of autotransformer) to step the voltage up to the needs of the ignition, and a distributor to route the ensuing pulse to the correct spark plug at the correct time. The first reliable battery operated ignition was developed by the Dayton Engineering Laboratories Co. (Delco) and introduced in the 1910 Cadillac. This ignition was developed by Charles Kettering and was a wonder in its day. It consisted of a single coil, points (the switch), a capacitor and a distributor set up to allocate the spark from the ignition coil timed to the correct cylinder. The coil was basically an autotransformer set up to step up the low (6 or 12V) voltage supply to the high ignition voltage required to jump a spark plug gap. The points allow the coil to charge magnetically and then, when they are opened by a cam arrangement, the magnetic field collapses and a large (20KV or greater) voltage is produced. The capacitor is used to absorb the back EMF from the magnetic field in the coil to minimize point contact burning and maximize point life. The Kettering system became the primary ignition system for many years in the automotive industry due to its lower cost, higher reliability and relative simplicity..

Modern ignition systems Mechanically timed ignition Most four-stroke engines have used a mechanically timed electrical ignition system. The heart of the system is the distributor which contains a rotating cam running off the engine's drive, a set of breaker points, a condenser, a rotor and a distributor cap. External to the distributor is the ignition coil, the spark plugs, and wires linking the spark plugs and ignition coil to the distributor.

The power source is a lead-acid battery, kept charged by the car's electrical system, which generates electricity using a dynamo or alternator. The engine operates contact breaker points, which interrupt the current flow to an induction coil (known as the ignition coil).

The ignition coil consists of two transformer windings sharing a common magnetic core -- the primary and secondary windings. An alternating current in the primary induces alternating magnetic field in the coil's core. Because the ignition coil's secondary has far more windings than the primary, the coil is a step-up transformer which induces a much higher voltage across the secondary windings. For an ignition coil, one end of windings of both the primary and secondary are connected together. This common point is connected to the battery (usually through a current-limiting resistor). The other end of the primary is connected to the points within the distributor. The other end of the secondary is connected, via the distributor cap and rotor, to the spark plugs.

The ignition firing sequence begins with the points (or contact breaker) closed. A steady current flows from the battery, through the current-limiting resistor, through the coil primary, across the closed breaker points and finally back to the battery. This steady current produces a magnetic field within the coil's core. This magnetic field forms the energy reservoir that will be used to drive the ignition spark.

As the engine turns, so does the cam inside the distributor. The points ride on the cam so that as the engine turns and reaches the top of the engine's compression cycle, a high point in the cam causes the breaker points to open. This breaks the primary winding's circuit and abruptly stops the current flow through the breaker points.

Without the steady current flow through the points, the magnetic field generated in the coil immediately begins to quickly collapse. This rapid decay of the magnetic field induces a high voltage in the coil's secondary windings.

At the same time, current exits the coil's primary winding and begins to charge up the capacitor ("condenser") that lies across the now-open breaker points. This capacitor and the coil’s primary windings form an oscillating LC circuit. This LC circuit produces a damped, oscillating current which bounces energy between the capacitor’s electric field and the ignition coil’s magnetic field. The oscillating current in the coil’s primary, which produces an oscillating magnetic field in the coil, extends the high voltage pulse at the output of the secondary windings. This high voltage thus continues beyond the time of the initial field collapse pulse. The oscillation continues until the circuit’s energy is consumed.

The ignition coil's secondary windings are connected to the distributor cap. A turning Rotor (distributor), located on top of the breaker cam within the distributor cap, sequentially connects the coil's secondary windings to one of the several wires leading to each engine's spark plugs. The extremely high voltage from the coil's secondary – often higher than 1000 volts -- causes a spark to form across the gap of the spark plug. This, in turn, ignites the compressed air-fuel mixture within the engine. It is the creation of this spark which consumes the energy that was originally stored in the ignition coil’s magnetic field.

High performance engines with 8 or more cylinders that operate at high r.p.m. as in motor racing that demand higher rate and energy of sparks than the simple ignition circuit can provide may use either of these adaptations: The Lamborghini V-12 engine has both these adaptations and therefore uses two ignition coils and a single distributor that contains 4 contact breakers.

Except that more separate elements are involved, a distributor-based system is not greatly different from a magneto system. There are also advantages to this arrangement. For example, the position of the contact breaker points relative to the engine angle can be changed a small amount dynamically, allowing the ignition timing to be automatically advanced with increasing revolutions per minute (RPM) and/or increased manifold vacuum, giving better efficiency. However it is necessary to check periodically the maximum opening gap of the breaker(s), using a feeler gauge, since this mechanical adjustment affects the "dwell" time during which the coil charges, and breakers should be replaced when they have become pitted by electric arcing.

This system was used almost universally until the late 1970s, when Electronics ignition systems started to appear.

Electronic ignition The disadvantage of the mechanical system is the use of breaker points to interrupt the low voltage high current through the primary winding of the coil; the points are subject to mechanical wear where they ride the cam to open and shut, as well as oxidation and burning at the contact surfaces from the constant sparking. They require regular adjustment to compensate for wear, and the opening of the contact breakers, which is responsible for ignition timing, is subject to mechanical variations. In addition, the spark voltage is also dependent on contact effectiveness, and poor sparking can lead to lower engine efficiency. A mechanical contact breaker system cannot control an average ignition current of more than about 3 A while still giving a reasonable service life, and this may limit the power of the spark and ultimate engine speed.

Electronic ignition (EI) solves these problems. In the initial systems, points were still used but they only handled a low current which was used to control the high primary current through a solid state switching system. Soon, however, even these contact breaker points were replaced by an angle sensor of some kind - either optical, where a vaned rotor breaks a light beam, or more commonly using a Hall effect sensor, which responds to a rotating magnet mounted on a suitable shaft. The sensor output is shaped and processed by suitable circuitry, then used to trigger a switching device such as a thyristor, which switches a large flow of current through the coil. The rest of the system (distributor and spark plugs) remains as for the mechanical system. The lack of moving parts compared with the mechanical system leads to greater reliability and longer service intervals. For older cars, it is usually possible to retrofit an EI system in place of the mechanical one. In some cases, a modern distributor will fit into the older engine with no other modifications.

Other innovations are currently available on various cars. In some models, rather than one central coil, there are individual coils on each spark plug. This allows the coil a longer time to accumulate a charge between sparks, and therefore a higher energy spark. A variation on this has each coil handle two plugs, on cylinders which are 360 degrees out of phase (and therefore reach TDC at the same time); in the four cycle engine this means that one plug will be sparking during the end of the exhaust stroke while the other fires at the usual time, a so-called "wasted spark" arrangement which has no drawbacks apart from faster spark plug erosion; the paired cylinders are 1/4 and 2/3. Other systems do away with the distributor as a timing apparatus and use a magnetic Crank Angle Sensor mounted on the crankshaft to trigger the ignition at the proper time.

During the 1980s, EI systems were developed alongside other improvements such as fuel injection systems. After a while it became logical to combine the functions of fuel control and ignition into one electronic system known as an engine control unit.

Digital Electronic Ignitions At the turn of the century digital electronic ignition modules became available for small engines on such applications as chainsaws, string-trimmers, leaf blowers, and lawn mowers. This was made possible by low cost, high speed, and small footprint microcontrollers. Digital electronic ignition modules can be designed as either capacitive discharge (CDI) or inductive discharge ignitions (IDI). Capacitive discharge digital ignitions store charged energy for the spark in a capacitor within the module that can be released to the spark plug at virtually any time throughout the engine cycle via a control signal from the microprocessor. This allows for greater timing flexibility, and engine performance; especially when designed hand-in-hand with the engine carburetor.

Engine management In an Engine Control Unit (EMS), electronics control fuel delivery, ignition timing and firing order. Primary sensors on the system are engine angle (crank or Top Dead Center (TDC) position), airflow into the engine and throttle demand position. The circuitry determines which cylinder needs fuel and how much, opens the requisite injector to deliver it, then causes a spark at the right moment to burn it.Early EMS systems used analogue computer circuit designs to accomplish this, but as embedded systems became fast enough to keep up with the changing inputs at high revolutions, digital systems started to appear.

Some designs using EMS retain the original coil, distributor and spark plugs found on cars throughout history. Other systems dispense with the distributor and coil and use special spark plugs which each contain their own coil (Direct Ignition). This means high voltages are not routed all over the engine, they are created at the point at which they are needed. Such designs offer potentially much greater reliability than conventional arrangements.

Modern EMS systems usually monitor other engine parameters such as temperature and the amount of uncombined oxygen in the exhaust. This allows them to control the engine to minimise unburnt or partially burnt fuel and other noxious gases, leading to much cleaner and more fuel efficiency engines.

Turbine engines Turbine engines have a capacitor discharge ignition system using 1 or more igniter plugs, which are only used at startup or in case the combustor(s) flame goes out

Rocket engines have particularly demanding ignitions systems- if prompt ignition does not occur the chamber can fill with excess fuel and oxidiser and significant overpressure can occur (a 'hardstart'). Rockets often employ pyrotechnic devices that place flames across the face of the injector plate, or, alternatively, self-igniting chemicals.

See also

References The Model T Ford Ignition System & Spark Timing (pdf)

The ignition system of an internal-combustion engine is an important part of the overall engine system that provides for the timely burning of the fuel mixture within the engine.All conventional petrol (gasoline) engines require an ignition system. The ignition system is usually switched on/off through a Lock (device) switch, operated with a Key (lock)#Car key or code patch.

History The earliest petrol engines used a very crude ignition system. This often took the form of a copper or brass rod which protruded into the cylinder, which was heated using an external source. The fuel would ignite when it came into contact with the rod. Naturally this was very inefficient as the fuel would not be ignited in a controlled manner. This type of arrangement was quickly superseded by spark ignition, attributed to Karl Benz, a system which is generally used to this day, albeit with sparks generated by more advanced circuitry. Early low-speed stationary engines often used a moving contact which protruded into the cylinder. This contact was quickly closed and reopened at the precise instant, producing a spark across the contacts, generated by a coil.

Magneto system The simplest form of spark ignition is that using a Magneto (electrical). The engine spins a magnet inside a coil, and also operates a contact breaker, interrupting the current and causing the voltage to be increased sufficiently to jump a small gap. The spark plugs are connected directly from the magneto output. Magnetos are not used in modern cars, but because they generate their own electricity they are often found on piston aircraft engines and small engines such as mopeds, lawnmowers, snowblowers, chainsaws, etc. where there is no battery; also on the small engine's ancestor, the stationary engine (variously called "hit and miss") of the early twentieth century; on older gasoline or distillate farm tractors before battery starting and lighting became common; and also in aircraft piston engines, where their simplicity and self-contained nature confers a generally greater reliability as well as lighter weight in the absence of a battery and generator or alternator. Aircraft engines usually have multiple magnetos to provide redundancy (engineering) in the event of a failure. Some older automobiles had both a magneto system and a battery actuated system (see below) running simultaneously to ensure proper ignition under all conditions with the limited performance each system provided at the time.

Switchable systems The output of a Magneto (electrical) depends on the speed of the engine, and therefore starting can be problematic. Some magnetos incorporate an impulse system, which spins the magnet quickly at the proper moment, facilitating easier starting at slow cranking speeds. Some engines, such as aircraft but also the Ford Model T, utilized a system which relied on non rechargeable dry cells, (like large flashlight batteries, not what are usually thought of as automobile batteries today) to start the engine or for running at low speed; then the operator would manually switch the ignition over to magneto operation for high speed operation. In order to provide high voltage for the spark from the low voltage batteries, however, a "tickler" was used, which was essentially a larger version of the once ubiquitous electric buzzer. With this apparatus, the direct current passes through an electromagnetic coil which pulls open a pair of contact points, interrupting the current; the magnetic field collapses, the spring-loaded points close again, the circuit is reestablished, and the cycle repeats rapidly. The rapidly collapsing magnetic field, however, induces a high voltage across the coil which can only relieve itself by arcing across the contact points; while in the case of the buzzer this is a problem as it causes the points to oxidize and/or weld together, in the case of the ignition system this becomes the source of the high voltage to operate the spark plugs. In this mode of operation, the coil would "buzz" continuously, producing a constant train of sparks. The entire apparatus was known as the Model T spark coil (in contrast to the modern ignition coil which is only the actual coil component of the system), and long after the demise of the Model T as transportation they remained a popular self-contained source of high voltage for electrical home experimenters, appearing in articles in magazines such as Popular Mechanics and projects for school science fairs as late as the early 1960s. In the UK these devices were commonly known as trembler coils and were popular in cars pre-1910, and also in commercial vehicles with large engines until around 1925 to ease starting.

The Model T (built into the flywheel) differed from modern implementations by not providing high voltage directly at the output; the maximum voltage produced was about 30 volts, and therefore also had to be run through the spark coil to provide high enough voltage for ignition, as described above, although the coil would not "buzz" continuously in this case, only going through one cycle per spark. In either case, the high voltage was switched to the appropriate spark plug by the timer mounted on the front of the engine, the equivalent of the modern distributor. The timing of the spark was adjustable by rotating this mechanism through a lever mounted on the steering.

Battery operated ignition With the universal adaptation of electrical starting for automobiles, and the concomitant availability of a large battery to provide a constant source of electricity, magneto systems were abandoned for systems which interrupted current at battery voltage, used an ignition coil (a type of autotransformer) to step the voltage up to the needs of the ignition, and a distributor to route the ensuing pulse to the correct spark plug at the correct time. The first reliable battery operated ignition was developed by the Dayton Engineering Laboratories Co. (Delco) and introduced in the 1910 Cadillac. This ignition was developed by Charles Kettering and was a wonder in its day. It consisted of a single coil, points (the switch), a capacitor and a distributor set up to allocate the spark from the ignition coil timed to the correct cylinder. The coil was basically an autotransformer set up to step up the low (6 or 12V) voltage supply to the high ignition voltage required to jump a spark plug gap. The points allow the coil to charge magnetically and then, when they are opened by a cam arrangement, the magnetic field collapses and a large (20KV or greater) voltage is produced. The capacitor is used to absorb the back EMF from the magnetic field in the coil to minimize point contact burning and maximize point life. The Kettering system became the primary ignition system for many years in the automotive industry due to its lower cost, higher reliability and relative simplicity..

Modern ignition systems Mechanically timed ignition Most four-stroke engines have used a mechanically timed electrical ignition system. The heart of the system is the distributor which contains a rotating cam running off the engine's drive, a set of breaker points, a condenser, a rotor and a distributor cap. External to the distributor is the ignition coil, the spark plugs, and wires linking the spark plugs and ignition coil to the distributor.

The power source is a lead-acid battery, kept charged by the car's electrical system, which generates electricity using a dynamo or alternator. The engine operates contact breaker points, which interrupt the current flow to an induction coil (known as the ignition coil).

The ignition coil consists of two transformer windings sharing a common magnetic core -- the primary and secondary windings. An alternating current in the primary induces alternating magnetic field in the coil's core. Because the ignition coil's secondary has far more windings than the primary, the coil is a step-up transformer which induces a much higher voltage across the secondary windings. For an ignition coil, one end of windings of both the primary and secondary are connected together. This common point is connected to the battery (usually through a current-limiting resistor). The other end of the primary is connected to the points within the distributor. The other end of the secondary is connected, via the distributor cap and rotor, to the spark plugs.

The ignition firing sequence begins with the points (or contact breaker) closed. A steady current flows from the battery, through the current-limiting resistor, through the coil primary, across the closed breaker points and finally back to the battery. This steady current produces a magnetic field within the coil's core. This magnetic field forms the energy reservoir that will be used to drive the ignition spark.

As the engine turns, so does the cam inside the distributor. The points ride on the cam so that as the engine turns and reaches the top of the engine's compression cycle, a high point in the cam causes the breaker points to open. This breaks the primary winding's circuit and abruptly stops the current flow through the breaker points.

Without the steady current flow through the points, the magnetic field generated in the coil immediately begins to quickly collapse. This rapid decay of the magnetic field induces a high voltage in the coil's secondary windings.

At the same time, current exits the coil's primary winding and begins to charge up the capacitor ("condenser") that lies across the now-open breaker points. This capacitor and the coil’s primary windings form an oscillating LC circuit. This LC circuit produces a damped, oscillating current which bounces energy between the capacitor’s electric field and the ignition coil’s magnetic field. The oscillating current in the coil’s primary, which produces an oscillating magnetic field in the coil, extends the high voltage pulse at the output of the secondary windings. This high voltage thus continues beyond the time of the initial field collapse pulse. The oscillation continues until the circuit’s energy is consumed.

The ignition coil's secondary windings are connected to the distributor cap. A turning Rotor (distributor), located on top of the breaker cam within the distributor cap, sequentially connects the coil's secondary windings to one of the several wires leading to each engine's spark plugs. The extremely high voltage from the coil's secondary – often higher than 1000 volts -- causes a spark to form across the gap of the spark plug. This, in turn, ignites the compressed air-fuel mixture within the engine. It is the creation of this spark which consumes the energy that was originally stored in the ignition coil’s magnetic field.

High performance engines with 8 or more cylinders that operate at high r.p.m. as in motor racing that demand higher rate and energy of sparks than the simple ignition circuit can provide may use either of these adaptations: The Lamborghini V-12 engine has both these adaptations and therefore uses two ignition coils and a single distributor that contains 4 contact breakers.

Except that more separate elements are involved, a distributor-based system is not greatly different from a magneto system. There are also advantages to this arrangement. For example, the position of the contact breaker points relative to the engine angle can be changed a small amount dynamically, allowing the ignition timing to be automatically advanced with increasing revolutions per minute (RPM) and/or increased manifold vacuum, giving better efficiency. However it is necessary to check periodically the maximum opening gap of the breaker(s), using a feeler gauge, since this mechanical adjustment affects the "dwell" time during which the coil charges, and breakers should be replaced when they have become pitted by electric arcing.

This system was used almost universally until the late 1970s, when Electronics ignition systems started to appear.

Electronic ignition The disadvantage of the mechanical system is the use of breaker points to interrupt the low voltage high current through the primary winding of the coil; the points are subject to mechanical wear where they ride the cam to open and shut, as well as oxidation and burning at the contact surfaces from the constant sparking. They require regular adjustment to compensate for wear, and the opening of the contact breakers, which is responsible for ignition timing, is subject to mechanical variations. In addition, the spark voltage is also dependent on contact effectiveness, and poor sparking can lead to lower engine efficiency. A mechanical contact breaker system cannot control an average ignition current of more than about 3 A while still giving a reasonable service life, and this may limit the power of the spark and ultimate engine speed.

Electronic ignition (EI) solves these problems. In the initial systems, points were still used but they only handled a low current which was used to control the high primary current through a solid state switching system. Soon, however, even these contact breaker points were replaced by an angle sensor of some kind - either optical, where a vaned rotor breaks a light beam, or more commonly using a Hall effect sensor, which responds to a rotating magnet mounted on a suitable shaft. The sensor output is shaped and processed by suitable circuitry, then used to trigger a switching device such as a thyristor, which switches a large flow of current through the coil. The rest of the system (distributor and spark plugs) remains as for the mechanical system. The lack of moving parts compared with the mechanical system leads to greater reliability and longer service intervals. For older cars, it is usually possible to retrofit an EI system in place of the mechanical one. In some cases, a modern distributor will fit into the older engine with no other modifications.

Other innovations are currently available on various cars. In some models, rather than one central coil, there are individual coils on each spark plug. This allows the coil a longer time to accumulate a charge between sparks, and therefore a higher energy spark. A variation on this has each coil handle two plugs, on cylinders which are 360 degrees out of phase (and therefore reach TDC at the same time); in the four cycle engine this means that one plug will be sparking during the end of the exhaust stroke while the other fires at the usual time, a so-called "wasted spark" arrangement which has no drawbacks apart from faster spark plug erosion; the paired cylinders are 1/4 and 2/3. Other systems do away with the distributor as a timing apparatus and use a magnetic Crank Angle Sensor mounted on the crankshaft to trigger the ignition at the proper time.

During the 1980s, EI systems were developed alongside other improvements such as fuel injection systems. After a while it became logical to combine the functions of fuel control and ignition into one electronic system known as an engine control unit.

Digital Electronic Ignitions At the turn of the century digital electronic ignition modules became available for small engines on such applications as chainsaws, string-trimmers, leaf blowers, and lawn mowers. This was made possible by low cost, high speed, and small footprint microcontrollers. Digital electronic ignition modules can be designed as either capacitive discharge (CDI) or inductive discharge ignitions (IDI). Capacitive discharge digital ignitions store charged energy for the spark in a capacitor within the module that can be released to the spark plug at virtually any time throughout the engine cycle via a control signal from the microprocessor. This allows for greater timing flexibility, and engine performance; especially when designed hand-in-hand with the engine carburetor.

Engine management In an Engine Control Unit (EMS), electronics control fuel delivery, ignition timing and firing order. Primary sensors on the system are engine angle (crank or Top Dead Center (TDC) position), airflow into the engine and throttle demand position. The circuitry determines which cylinder needs fuel and how much, opens the requisite injector to deliver it, then causes a spark at the right moment to burn it.Early EMS systems used analogue computer circuit designs to accomplish this, but as embedded systems became fast enough to keep up with the changing inputs at high revolutions, digital systems started to appear.

Some designs using EMS retain the original coil, distributor and spark plugs found on cars throughout history. Other systems dispense with the distributor and coil and use special spark plugs which each contain their own coil (Direct Ignition). This means high voltages are not routed all over the engine, they are created at the point at which they are needed. Such designs offer potentially much greater reliability than conventional arrangements.

Modern EMS systems usually monitor other engine parameters such as temperature and the amount of uncombined oxygen in the exhaust. This allows them to control the engine to minimise unburnt or partially burnt fuel and other noxious gases, leading to much cleaner and more fuel efficiency engines.

Turbine engines Turbine engines have a capacitor discharge ignition system using 1 or more igniter plugs, which are only used at startup or in case the combustor(s) flame goes out

Rocket engines have particularly demanding ignitions systems- if prompt ignition does not occur the chamber can fill with excess fuel and oxidiser and significant overpressure can occur (a 'hardstart'). Rockets often employ pyrotechnic devices that place flames across the face of the injector plate, or, alternatively, self-igniting chemicals.

See also

References The Model T Ford Ignition System & Spark Timing (pdf)



Ignition Systems
This course is for technicians that have a basic understanding of how ignition systems work, but lack confidence with newer electronic systems.

Ignition Systems.
General information about ignition systems including coils, distributors, spark plugs and electronic ignition.

Ignition system - Wikipedia, the free encyclopedia
An ignition system is a system for igniting a fuel-air mixture. It is best known in the field of internal combustion engines but also has other applications, e.g. in oil-fired and ...

Ignition systems
Bosch Automotive UK - Ignition Leads, Ignition systems ... Ignition systems. Bosch ignition systems never stop setting new standards.

Ignition systems
Bosch Automotive UK - Ignition Leads, Ignition systems ... High-tension ignition cables from Bosch. Bosch now achieves a market coverage of more than 90% in Europe embracing all ...

REVOLUTIONARY IGNITION FOR ALL 2CV TYPES
REVOLUTIONARY IGNITION FOR ALL CITROËN 2CV TYPES 123IGNITION An ignition system so advanced yet so simple that all 2cvs should have it!

eBay UK Shop - Bestek Ignition Systems: Electronic ignition kits ...
Buy Electronic ignition kits, Contact points Distributors, Spare Parts items from Bestek Ignition Systems eBay Shop. We sell Electronic ignition kits, 123 Ignition items on eBay ...

Pazon ignition systems
Pazon electronic ignition systems ... All classic bike owners have heard of Boyer Bransden. This company revolutionised classic bike ignition systems in the 1970s ...

HowStuffWorks "How Automobile Ignition Systems Work"
The ignition system brings your car s engine and subsystems together. Learn about the parts of your ignition system and innovations in ignition systems.

Ignition Systems
Ignition Systems provides information security and remediation services to large medical practices, small to medium hospitals, and other small-medium organizations. We ... ...

 

Ignition System



 
Copyright © 2008 Hintcenter.com - All rights reserved.
Home | Terms of Use | Privacy Policy
All Trademarks belong to their repective owners. Many aspects of this page are used under
commercial commons license from Yahoo!